Basic Electrical Safety Awareness
Working with electricity is one of the most dangerous jobs in our industry. There are 600 to 800 electrical accidents in Canada every year , not to mention related deaths. To help reduce that number, the Canadian Standards Association and the NFPA have issued new standard that address the requirements regarding electrical safety.
The CSA Z462 , Workplace Electrical Safety and the NFPA 70E Electrical Safety in the Work Place applies to electrical workers, and provides guidance to employers on what qualifications are required for electrical work , and cautions against allowing non-qualified people inside hazard boundaries.
Electricity is toxic energy. It takes about 10 milliamps (mA) of current for your skin to start burning and blistering. At about 20 mA of current, your breathing becomes labored and you can‚Äôt let go of the electrical circuit or tool that is giving you the shock, while 75 mA of current passing through the chest area may cause ventricular fibrillation of the heart, Ventricular fibrillation is a rapid, irregular heartbeat that can cause death in minutes. in addition, you may suffer severe burns and muscular damage , a few amps will cause irreversible body damage. While human beings are only designed to handle 5 or 6 mA, the typical over-current at which a fuse or circuit breaker opens a circuit is 15,000 mA.
Who Should Attend
This course has been designed to focus on the Non - Electrical worker and those who are exposed to electrical hazards or work around electricity.
On completion of this training the participant will have a better appreciation for electrical hazards.
CSA Z462-12 Workplace Electrical Safety
NFPA 70E Electrical Safety in the Work Place
This course qualifies for Continuing Education Unit Credits (CEU).
- Occupational Health and Safety Act and Regulations
- Provincial and State Regulations
- CSA Standard Z460 Control of Hazardous Energy
- National and Canadian Electrical Code
- CSA Z462 Workplace Electrical Safety
- NFPA 70E Electrical Safety in the Work Place
This course takes approximately 60 minutes to complete
A passing grade of 100% or higher required. Up to 3 attempts are provided.
A certificate will be provided upon the successful completion of this course