Course details

Asbestos was used for decades in insulation, floor tile, roofing, pipe wrap, and drywall, and much of it is still in place across American buildings today. The danger is that you usually cannot see, smell, or feel the fibers that cause asbestosis, lung cancer, and mesothelioma. This online course teaches you to recognize asbestos-containing materials, understand the exposure limits that govern the work, and apply the controls that keep fibers out of the air and out of your lungs.

The training is aligned with OSHA's asbestos standards for general industry (29 CFR 1910.1001) and construction (29 CFR 1926.1101), along with EPA AHERA requirements. It answers a direct compliance need: OSHA requires employers to train employees who may be exposed at or above the permissible exposure limit, both before assignment and annually after that. This course covers that required awareness content online, so workers train on their own schedule, then pair it with the site-specific instruction their workplace provides and return to the job trained and documented.

More importantly, it gives workers the single most valuable habit in asbestos safety: when in doubt, treat the material as asbestos and act accordingly.

The payoff is a crew that recognizes a strike-by or caught-in hazard before it becomes an incident, and a company with the documentation to prove it trained them.

This course is an informational and awareness-based training resource, developed and reviewed by an OSHA subject matter expert to ensure content accuracy and regulatory alignment. However, completion of this course does not qualify as OSHA Outreach Training under the OSHA Outreach Training Program, nor does it qualify you as a Competent Person as defined under any OSHA standard.

By the end, you will not just check a compliance box. You will understand exactly how these pathogens spread, how to prevent exposure, and what to do in the critical minutes after contact occurs.

---

Course Overview

Course Overview

What Asbestos Is and Where It Hides

Learn the physical properties of asbestos and the common building materials where it is found, from thermal insulation and floor tile to roofing and pipe wrap. You leave able to spot likely asbestos-containing materials on a real site.

The Health Effects of Exposure

Understand why asbestos is so dangerous, including asbestosis, lung cancer, and mesothelioma, and why the long latency period makes prevention today so critical. This is the section that turns compliance into personal motivation.

Identifying ACM and PACM

Learn to distinguish asbestos-containing materials (ACM) from presumed asbestos-containing materials (PACM) and why both must be handled with the same caution until proven otherwise.

OSHA Work Classifications (Class I through IV)

Understand OSHA's four classes of asbestos work and how the required precautions change with each. Workers and supervisors learn where a given task falls and what that means for controls.

Permissible Exposure Limits and Excursion Limits

Get a clear explanation of the permissible exposure limit (0.1 fibers per cubic centimeter as an 8-hour time-weighted average) and the excursion limit (1.0 f/cc over 30 minutes), plus what triggers monitoring and additional protections.

Exposure Controls, PPE, and Safe Work Practices

Explore the engineering controls, work practices, respiratory protection, and personal protective equipment that reduce exposure, and what to do if a fiber release occurs.

Regulatory Framework: OSHA and EPA

See how OSHA's standards and EPA's AHERA requirements fit together so employers understand their full obligations, not just one agency's slice of them.

Who Should Take This Course?

This course is designed for anyone involved in concrete and masonry construction, including:

• Concrete finishers, form setters, and laborers
• Masons and bricklayers
• Construction supervisors, foremen, and superintendents
• Site safety officers and competent persons
• General contractors and subcontractors
• Apprentices and workers new to concrete and masonry operations
• Employers responsible for Subpart Q compliance and worker training

Key Benefits

• Prevent the site's most severe incidents. Wall collapses, formwork failures, and impalements are catastrophic and preventable. This course targets them.
• Put Subpart Q into plain language. Workers learn what the standard requires and, just as important, why, so the rules stick.
• Support inspection readiness. Documented, standard-aligned training strengthens your compliance record.
• Train the crew online. Deliver consistent safety knowledge without pulling the team off the project.
• Earn a certificate. Demonstrate completion to general contractors, clients, and regulators.

Why Enroll in This Course?

In concrete and masonry work, the difference between a normal day and a fatality is often a single control that someone forgot or never understood. This course closes that gap by teaching the Subpart Q requirements in a practical, jobsite-focused way that crews actually retain. You get clear instruction on the hazards that cause the most serious injuries, guidance you can apply on the next pour or wall, and a certificate that documents your training. Employers get a workforce that understands limited access zones, formwork risks, and cement hazards, plus a training record that supports Subpart Q compliance. On projects where safety performance wins bids and prevents shutdowns, that is a direct return on a small investment.

Who Should Take This Course?

This awareness-level training is designed for anyone who may encounter asbestos on the job, including:

• Construction, renovation, and demolition workers
• Maintenance, custodial, and building-operations staff
• General industry employees working in older facilities
• Plumbers, electricians, HVAC technicians, and other trades
• Facility managers, supervisors, and safety officers
• Property managers and building inspectors
• Employers who need to meet OSHA's initial and annual training requirement

Key Benefits

• Take the classroom headache out of annual asbestos training. Complete the awareness portion online on your schedule, with no travel or instructor booking, and pair it with the site-specific training your workplace requires.
• Prevent an incurable disease. Asbestos illnesses cannot be reversed, only prevented. This training targets prevention where it counts.
• Make confident field decisions. Workers learn to recognize suspect materials and stop before creating an exposure.
• Strengthen compliance and reduce liability. Documented, standard-aligned training supports inspection readiness and a defensible safety record.
• Earn a certificate. Demonstrate completion to employers, clients, and regulators.

Why Enroll in This Course?

Asbestos remains one of the most serious and preventable occupational health hazards in the United States, and the cost of getting it wrong is measured in lives, not dollars. This course delivers the awareness-level training OSHA expects, in a format built for busy crews and real job sites. You get clear explanations of the limits and classifications that actually govern the work, practical guidance you can use the moment you spot a suspect material, and a certificate that documents your compliance. Employers get a workforce that recognizes risk before it becomes exposure and a training record that stands up to scrutiny. For skilled trades and general industry alike, that combination protects both health and the business.